Intended use
The DroneConnect Ground (DCG) antenna serves as a powerful traffic receiving station for recording air traffic data. It receives ADS-B (Automatic Dependent Surveillance - Broadcast) and FLARM (Flight Alarm) signals from air traffic participants such as gliders, helicopters and motorized aircraft as well as DRI (Direct Remote ID) signals from drones. This data is transmitted via LTE to the Droniq UTM (UAS Traffic Management) system, where it is combined with other data sources.
Web access to TraX from Droniq provides the pilot with a comprehensive overview of all available traffic data, optimizing the air situation display for UAS operations. The compact and modular design of the antenna and its IP67 certification enable flexible use at different locations. With a wide range of accessories, it can be used both mobile and stationary.

Scope of delivery
- DroneConnect Ground incl. connectivity
- ADS-B antenna with cable and mounting material
- FLARM antenna with cable and mounting material
- Standard USB charger with USB-M8 cable
- Powerbank
- POE injector incl. power supply unit
- Mast extension (80 cm)
- L-shaped bracket / balcony bracket
- U-shaped bracket
- Tripod / tripod
- incl. FLARM license
Notice:
- A commercially available PoE Outdoor injector and Ethernet cable must also be purchased for permanent outdoor installation.

Technical data
Hardware | DroneConnect Ground |
---|---|
Antennas and alignment | FLARM & ADS-B: External DRI (Direct Remote ID): Internal |
Weight | Receiver: 2.35 kg |
Dimensions | Core antenna: 243 x 158 x 158 mm |
Operating temperature | -20°C to +55°C |
Certification | IP67 |
Connectivity | DroneConnect Ground |
---|---|
Technology | LTE 4G Cat4 |
Data transmission | Transmission to the server via Ethernet or LTE mobile connection: CAT 4 modem |
Sensors | DroneConnect Ground |
---|---|
GNSS | Systems: Multi-constellation (GPS, GALILEO, GLONASS, BeiDou, EGNOS) Precision: 2.5m CEP |
FLARM receiver | Frequency: 868 MHz Sensitivity up to -120 dBm Range: up to 20 km (depending on operating conditions) License: lifetime FLARM license (updates required) Polarization: vertical |
ADS-B receiver | Frequency: 1090 MHz Sensitivity: -84 / +15 max. dBm Range: up to 300 km (depending on operating conditions) Polarization: vertical |
Direct Remote Identification (DRI) | Bluetooth: Frequency range: 2.4 GHz WiFi: Frequencies: 2.4 GHz / 5 GHz |
Antenna characteristics | Omni-directional |
Power supply | DroneConnect Ground |
---|---|
Source | PoE (primary power supply) USB |
Power over Ethernet (PoE) | PoE injector, Ethernet cable, 36-57 V DC, up to max. 15W |
USB | M8 to USB cable, 5V DC, up to max. 15W |
Powerbank | M8 to USB cable, 20,000 mAh |
Information on product safety
Manufacturer:
f.u.n.k.e. AVIONICS GmbH
Heinz-Strachowitz-Str. 4
86807 Buchloe
Germany
info@funkeavionics.de

Product Features

-
ADS-B & FLARM receiver
The station receives ADS-B (Automatic Dependent Surveillance - Broadcast) signals from surrounding air traffic and FLARM (Flight Alarm) signals from gliders, helicopters and motorized aircraft
-
LTE connectivity
ADS-B and FLARM signals are sent via LTE to Droniq's drone traffic management system (UTM), where they are fused with other data sources.
-
Captures Direct Remote ID
The DroneConnect Ground ground station captures Direct Remote ID signals from surrounding drones.
-
UTM integration
The DroneConnect Ground Station transmits its current position to the Droniq UTM, making it visible to others. By accessing the UTM system, drone pilots receive a combined view of all available traffic data. This enables a visualization of the air situation for the remote pilot.
-
Self-sufficient use around the clock
Thanks to its slim design and IP67 certification, the traffic reception station can be permanently installed at various locations and operated around the clock (24/7).