Intended use
The Dronetag mini makes drones visible to anyone, anywhere, anytime by transmitting its own position to the Droniq UTM via LTE or broadcasting via Direct Remote ID. With access to the UTM system (e.g. TrackViewer), the remote pilot can view the current air situation from manned and unmanned air traffic data at any time.
Scope of delivery
- Dronetag-Mini plus service fee "TrackConnect" (see below)
- Micro USB cable
- 2x mounting pad (counterpart to Dronetag Mini)
- Cleaning pad
- Quick guide
Service flat rate in subscription:
As part of the hardware purchase, a "TrackConnect" service fee of EUR 80.00 net per year is due, which will be invoiced for one year with the 1st of the following month. The Dronetag Mini is delivered with connectivity for the German airspace. In addition, the configuration is specially adapted for integration into the Droniq UTM. On request, we are happy to offer solutions for use in other countries.
Necessary addition:
For full-scale use, in addition to the Dronetag mini and connectivity, a paid access to our UTM TrackViewer is required, so that the remote pilot can see the positions of aircraft as well as the relevant manned air traffic in the vicinity of the drone operation.
Technical data
Antennas & Sensors | Dronetag mini | Dronetag Beacon |
---|---|---|
Sensors | GNSS, barometer, accelerometer | GNSS, barometer, accelerometer |
JST SH 4-pin | Read sensor data from MAVlink compatible flight controllers (e.g. Pixhawk), UART | Read sensor data from MAVlink compatible flight controllers (e.g. Pixhawk), UART |
MAVlink | Baud rate: 1152000, MAVlink 2 protocol | Baud rate: 1152000, MAVlink 2 protocol |
Location determination | GPS L1, GLONASS L1, Galileo E1, SBAS | GPS L1, GLONASS L1, Galileo E1, SBAS |
SIM card | Chip SIM soldered onto the motherboard | - |
Built in antennas | Internal LTE, Bluetooth and GNSS | Bluetooth and GNSS |
Optional antennas | External LTE and Bluetooth via MMCX connector | Bluetooth via MMCX connector |
External connections | 3.3V extension plug and 5V micro USB | 3.3V extension plug and 5V micro USB |
Power supply | Dronetag mini | Dronetag Beacon |
---|---|---|
Battery | LiPo 3.7V 500 mAh | LiPo 3.7V 200 mAh |
Connection | JST SH 4-pin connector (3.3 V) or Micro USB (5V) | JST SH 4-pin connector (3.3 V) or Micro USB (5V) |
Charging port | 5V Micro USB | 5V Micro USB |
Average power consumption | 50 mA | 15 mA |
Maximum current consumption | 1 A | 100 mA |
Loading time | 2 hours from a discharged state | 2 hours from a discharged state |
Battery operating time | 8-14 hours (depending on configuration) | 8-16 hours (depending on the configuration) |
Connectivity | Dronetag mini | Dronetag Beacon |
---|---|---|
Mobile communications | LTE-M | - |
Mobile radio bands | 3, 8, 20 for the EU | - |
Mobile radio frequency | 698-960, 1710-2170 MHz | - |
Bluetooth | Bluetooth 4.0 and 5.0 / 2.4GHz | Bluetooth 4.0 and 5.0 / 2.4GHz |
Hardware | Dronetag mini | Dronetag Beacon |
---|---|---|
Weight | 32 Gram | 16 gram |
Dimensions | 54x35x15 mm | 37x26x16 mm |
Housing | Plastic | Plastic |
Protection class | IP43 | IP43 |
Operating temperature | -5°C to +40°C (23°F to 104°F) | -20°C to +60°C (-4°F to 140°F) |
Fastening mechanism | 3M Dual-Lock SJ4570 | 3M Dual-Lock SJ4570 |
THREATS FOR EVERYONE,
VISIBLE EVERYWHERE & ANYTIME
Drones for everyone, everywhere and always visible
Product Features
-
Network Remote ID
Dronetag Mini transmits the position and identification of the drone to Droniq's UTM. By displaying the real-time data in the Dronetag App, Dronetag enables coordination in European U-Space.
-
Direct Remote ID
The data of the drone is transmitted via Bluetooth up to a distance of 1.5 km. With Direct Remote ID, you meet all legal requirements.
-
Smallest and lightest device
Dronetag Mini is the smallest, lightest and most affordable remote identification device on the market.
About the size of a matchbox and weighing 32g, it has everything you need to fly safely and according to regulations. -
Droniq Dronetag Config App
Available on all devices(Google Play Store and Apple App Store)
With the Droniq Dronetag Config App you can easily and quickly manage your devices. -
Independent application possibilities
The Dronetag Mini can be attached to any drone with a dual-lock closure.
-
Reliable position determination
Receives signals from GPS, GLONASS, Galileo and SBAS for reliable positioning
-
Takeoff, landing and free fall detection
Dronetag Mini warns other pilots who are in the vicinity of possible dangers. So you can fly carefree from takeoff to landing.
-
Battery with up to 14 hours endurance
Thanks to an integrated, powerful battery, you can fly with the Dronetag-Mini for up to 14 hours. For even longer missions, you can use their drone as a power source.
-
Internal LTE, Bluetooth and GNSS antennas
The device has internal GNSS, LTE and Bluetooth antennas. Optionally, external LTE and Bluetooth antennas can be added for better signal reception.
-
Built to the latest remote ID standards
Compatible with Direct & Network Remote ID according to prEN 4709-002 and ASTM F34 standards
-
Multiple integrated sensors
Multiple integrated sensors
-
MAVLink
To get onboard data, the Dronetag mini supports integration with professional DJI and Pixhawk flight controllers via an EXT connector.
-
Safety at the highest level
With integrated chip SIM, firmware updates over the air or DTLS encryption, your drone operation is safe and secure.